Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Copperfield Flue Liner Replacement: The Greenwich Owner’s Guide
A Copperfield flue liner replacement in Greenwich typically runs $2,800 to $5,400 installed, depending on liner length, diameter, and whether the existing liner comes out clean or fights us on the way. We stock Copperfield-compatible stainless liners on the truck for most common sizes, and Corrine Halstead has built our Greenwich crew’s reputation on one rule: the camera goes down first, you see the photos, then you get a written price before anything gets touched.
Most Greenwich homeowners discover they need this when a Level 2 camera scan shows a cracked liner they didn’t know they had. Sometimes it’s a rusted seam letting exhaust bleed into the chimney chase. Other times the liner’s separated at a joint and pieces are sitting in the smoke shelf. The symptom that usually triggers the call is a carbon monoxide detector going off in the room with the fireplace, or visible rust staining on the exterior brick.
Which Copperfield Models This Applies To
Copperfield’s flue liners are sized by inner diameter in 1/4-inch increments, and that’s where most mismatches happen. The common residential sizes in Greenwich are 5.5″, 6″, 7″, and 8″, but we’ve pulled 9″ liners out of older backcountry estates with wood-burning inserts. The liner’s oval-to-round adapters and top plates are specific to each appliance collar, so reading the model plate on the unit itself matters more than any brand marking on the old liner.
We work with Copperfield parts directly and install their stainless flex and rigid liners alongside equivalent DuraFlex and HeatShield components when the spec matches. Here’s the compatibility gotcha: Copperfield’s 6″ liner uses a slightly different locking collar profile than DuraFlex’s 6″, so mixing the two mid-run creates a joint that leaks. We don’t do that. If the existing liner is Copperfield, we replace it with Copperfield-compatible components from the appliance collar to the cap, unless you specifically approve an aftermarket equivalent in writing.
Signs Your Copperfield Flue Liner Replacement Is Failing

- Flaking rust inside the flue. Stainless liners don’t rust in one season, but a liner that’s been hot-cold cycling for 15 years in Greenwich’s humid summers and salty winter air will start shedding at the welded seams. The camera shows scale and pinholes before the liner actually splits.
- Water in the firebox after rain. A failed top plate or a cracked liner joint lets water run straight down the inside of the chimney. If the damper’s rusted open and there’s a puddle, the liner’s more likely the cause than the crown.
- Smoke backing up into the room. A collapsed liner section restricts draft and sends smoke where it doesn’t belong. This fails faster in Greenwich colonials with exterior chimneys that take weather on three sides.
- Gas odor or lingering combustion smell with a gas fireplace. Gas exhaust is engineered for specific liner diameters. A corroded liner bore changes the draft and pushes fumes into the chase.
- White or tan staining on the exterior brick near the flue. That’s condensation carrying creosote acids through a cracked liner joint, and it’s eating the mortar from inside.
Before
AfterReplacement Cost & What’s Included
In Greenwich, expect $2,800 to $5,400 for a full Copperfield-compatible liner replacement, including removal of the old liner, the new stainless liner, top plate, cap, and all termination hardware. A straight drop into an existing clay tile flue with no obstructions lands at the low end. The high end covers an exterior chimney with a deteriorated clay liner that needs full removal, or a chase-style install that requires additional framing access.
What you get with us, every time: a Level 2 camera scan before work starts, the photos showing exactly what we found, a written scope and written price with no verbal surprises, and the 365-Day Done Right Promise in writing. Clause 1 of the Haven Standard means the price you approve is the price you pay. We also photograph the completed install and give you that record before we leave.
Warranty specifics: Copperfield’s stainless liner carries a limited lifetime warranty on the material when installed to spec. Our labor warranty on liner replacement in Greenwich is covered under the 365-Day Done Right Promise. If something’s not right, we make it right.
DIY or Call Us?

Liner replacement is not a homeowner job. The liner runs the full height of the chimney, and a section that snags or separates halfway down leaves you with an unusable fireplace and a partially blocked flue. We’re also talking about working at height on a Greenwich roofline, which means harnesses, roof anchors, and a second person who knows what they’re doing. If you’re on an icy slate roof in January, that’s a hospital trip waiting to happen.
What you can safely do: check the firebox for rust flakes after a rain, look for staining on the exterior brick, and call us at (516) 399-5497 if anything looks off. The camera scan is the diagnostic. It takes about 45 minutes and costs far less than guessing wrong.
FAQs
A Copperfield stainless liner in Greenwich typically lasts 15 to 25 years, but exterior chimneys that face the Sound weather and freeze-thaw cycles can shorten that to 12 to 18 years. The camera tells us what’s left. If you’d like ours to tell you, call (516) 399-5497 for a scan and a written condition report.
Small pinholes at a welded seam can sometimes be patched with a HeatShield resurfacing system, but a full-thickness crack or a separated joint is a replacement. We won’t recommend a repair that buys you one season. The camera photos show you exactly what we’re seeing. Call (516) 399-5497 and we’ll send you the images.
Most Copperfield liner replacements in Greenwich are done in a single day, including the removal, the install, and the final camera verification. A two-story exterior chimney with a full clay removal runs five to seven hours. You’ll have the documentary photo record in hand by the time we pack up.
We keep Copperfield-compatible liners in the most common Greenwich sizes (6″, 7″, and 8″ stainless flex) on the truck, along with matching top plates and caps. Odd sizes or rigid sections for tall straight runs usually arrive in two to three days through our buying network. We source from Copperfield, DuraFlex, HeatShield, and Gelco, but the Copperfield spec is what we match when your existing liner was Copperfield.
Call (516) 399-5497 and a live person answers. Tell us what the camera showed, or tell us what you’re seeing in the firebox, and we’ll get you a written price before anything gets pulled.
Written by Corrine Halstead, Owner, Level Two Chimney Greenwich at Level Two Chimney Greenwich, serving Greenwich and nearby areas.





Before
After
Before
After